Thread: Angeles City Hotels & Accomodations
+
Add Report
Results 841 to 855 of 1818
-
11-27-14 02:37 #978Senior Member

Posts: 8165Priced, as in how much?
Originally Posted by Golfinho
[View Original Post]
-
11-27-14 01:33 #977Senior Member

Posts: 2379The new Central Park Hotel - Excellent. Just finished a week there while they have the soft opening. Rooms above the 8th floor looked great, will be available soon. Of course, priced.
-
11-17-14 09:11 #976Senior Member

Posts: 111Hu??
Hu? Doubt I ever paid more than 1000 pesos for a room; certainly never more than 1200 pesos. The gals favorite hotel is where I am staying at. Period. Also, there is something pretty disturbing of the frame needing to spend $100 or better just to impress some w*e.
Originally Posted by Golfinho
[View Original Post]
--Popper.
-
10-19-14 18:00 #975Senior Member

Posts: 2379The girls' favorite hotel is (guess what?)- ABC. Which ought to make it your favorite hotel, too. Although, it is invariably disconcerting when your date is more familiar with the space and the place than you are. Staying at the new Penthouse last June, girls hadn't been there before, but then they start comparing it to ABC. You can't win. Stay wherever is your comfort zone.
Originally Posted by XMan
[View Original Post]
-
10-19-14 15:57 #974Senior Member

Posts: 4567FreeKick deserves a kick.
AV, how about an AC hotel report?
My pic is from one of the newer hotels, and I've done a review.
Originally Posted by Amavida
[View Original Post]
-
10-19-14 08:42 #973Senior Member

Posts: 1856Please take moment to read the forum
If you took a millisecond to read the forum you would know that the Balibago area is one big red light district & as such old men with young pinays are de rigeur. You would also conclude that ABC is by far the better choice providing you can afford it.
Originally Posted by FreeKick
[View Original Post]
AV.
-
10-17-14 13:11 #972Senior Member

Posts: 4567Electric power is dirty? Noisy? Erratic? All over the place? Wow!
Originally Posted by Amavida
[View Original Post]
-
10-17-14 13:10 #971Senior Member

Posts: 1009Hi Huts,
Originally Posted by Hutsori
[View Original Post]
I was attempting (politely) to comment on your statement "Someone from Europe or Australia, where it's 220 V but 50 Hz may damage his equipment because a converter doesn't convert Hz".
To the best of my knowledge, if you use 50 Hz equipment on a 60 Hz power supply, no physical damage will result but any timing devices (such as clocks), will run faster.
I suspect the cause for the mortality of your converter lies elsewhere. Possibly the quality of the PI power supply, such as unfiltered spikes and surges. Filtered power supplies are very important in PI.
I also highlighted the importance of matching not just the input voltage and amperage to any charger, but also matching the output DC volts and amperage to the device. My apologies if this was stated elsewhere.
Cheers.
-
10-17-14 08:11 #970Senior Member

Posts: 1856Thats all true but the single most salient point is that Philippine power is dirty, noisy & erratic. I. e. Its all over the place. Destruction of devices is much more common than more developed countries.
Originally Posted by Hutsori
[View Original Post]
AV.
-
10-17-14 07:54 #969Senior Member

Posts: 1459Yes, you are correct. Commonly people mention 110/220 to distinguish the two. Most everything else you mention has already been addressed in the previous comments. A frequency mismatch may damage or destroy a device. This I know first hand using 220V/50Hz devices built for Europe in 220V/60Hz Asia.
Originally Posted by Ikksman
[View Original Post]
-
10-17-14 07:46 #968Senior Member

Posts: 80Holiday Inn Clark
Are we even sure that the Holiday Inn Clark is girl-friendly?
Even if it is, it's far from the action. So you'll be paying a lot extra in transportation and wasting time. I think they have a free shuttle to the mall, but probably only in the daytime. Maybe it's not bad if you have a steady "GF" and want a resort-type atmosphere, or are desperate to earn IHG points.
Originally Posted by FreeKick
[View Original Post]
-
10-17-14 07:06 #967Senior Member

Posts: 1009Good grief, When I last lived in Australia, the nominal voltage was 240 V, except WA which had previously been 250 V (long story). There was talk of it being reduced to 230 V at the time. But 220 V? Shit, I am out of date!
Originally Posted by Hutsori
[View Original Post]
Seriously though, you are correct in what you write, although portable electronics are often manufactured to automatically handle 100-240 V and 50-60 Hz. A few have a switch to change the voltage (my hairdryer does).
Additionally, as far as I know, the only difference that 50 or 60 Hz will make, is the ability for internal clocks to maintain the correct times.
When you are using chargers for laptops, batteries etc, it is important that both the output voltage (DC) and the amperage reasonably closely match the requirements of the device.
Ikks.
-
10-17-14 05:41 #966Senior Member

Posts: 1459There are 3 things to consider: 1) voltage, 2) hertz (frequency) and 3) watts.
Originally Posted by WestCoast1
[View Original Post]
Most on the conversation so far has focused on volts, e.g. 110 and 220. Electronics built for the US market are 110 V and 60 Hz, the Philippines is 220 V and is also 60 Hz. Someone from Europe or Australia, where it's 220 V but 50 Hz may damage his equipment because a converter doesn't convert Hz. The last thing is watts. For a mobile or ipod not a lot of watts are used. A device with a motor, like a vibrator, or a heater, like a hair drier, use a lot of watts. A battery charger may require a lot of watts. Same too for printers if you happen to travel with one of those. Make sure your converter can handle the watts of your device; most small portable ones won't protect high-watt devices. If you get any one of these three things wrong (mismatch) you'll damage or destroy your device. If you get a plug adapter try to find one that has built-in fuse so if you get the voltage, hertz or watts wrong it's the adapter that takes the hit and not your device.
Read this http://www.220-electronics.com/volta...ing-guide.html.
-
10-16-14 06:11 #965Senior Member

Posts: 8165Step-down converter (sometimes called a transformer).
Originally Posted by LifeIsABeach
[View Original Post]
Some hotels have that, some don't. Lets assume that his hotel does not, to be conservative for him. If his hotel does not have this, and HE simply plugs in the adapter, HE could fry his gear. I was in a foreign airport at Christmas and popped an adapter into the 220 v wall outlet, then plugged my american 110 v laptop power supply into the adapter, and the other end of the supply into my laptop. Turned on the lappy and all was fine for about 5 minutes, the system was up and running and charging away as would normally be the case. Then I noticed the 'charging' indicator went off. The lappy was running fine, but not charging. I checked the connections of the power supply to the lappy and to the wall, all seemed fine, but still the unit was not charging. I touched the power supply and it was unusually hot, and it had died. Unpluged it and take it all the way home and plugged it in to a 110 wall outlet showed it to be dead. Had to purchase a new one. Similar experience in CDO in mid-2013, I put an extra phone battery into an external charger (110) and plugged it right into the 220-110 adapter, then into the 220 wall outlet in the hotel CR, and the charger fried. In either 2010 or 11, I fried a Hitachi magic wand vibrator (pop!) just by plugging it into the 220-110 adapter, then plugging the adapter into a 220 v wall outlet in AC.
Originally Posted by Amavida
[View Original Post]
Correct. But there is an inherent assumption that his lappy / cell can handle the 220. I'll assume that it can't.
Originally Posted by Amavida
[View Original Post]
Bring an adapter (some hotels loan them at the front desk, but better to bring your own, see Radio Shack). In the pic below, the item in the box is a step- converter. It plugs into a 220 wall outlet, and you plug your 110 electronic items into it (I tend to plug a 110 v power-strip with 6 outlets into itm then plug my various 110 v items into the power strip). The other 4 items in the picture are adapters, they plug into the 220 wall outlet (see the round pegs), but when you plug your flat-bladed 110 electrical item into the adapter, it runs 220 v thru it to your 110 item. The item in the box, the step- converter, is probably 1 kg in weight. The adapters are a few ounces in weight.
Originally Posted by Amavida
[View Original Post]
-
10-16-14 03:58 #964Senior Member

Posts: 765Dildos
As others have stated, almost all laptops, tablets and cameras will work on either 220 or 110 vs. But if you are bringing some dildos that only work on 110 v, then you need a step up converter to 220 v. Just make sure that you do not electrocute the girl (s) and we need to see some pictures!
Originally Posted by Lou32
[View Original Post]

.png)








Reply With Quote


